ULTRASONIC TECHNOLOGY Industrial Ultrasonic Knives HARD FOAM CUTTING WITH ULTRASONIC TECHNOLOGY BT-57230 7,7° 7,7° 30 46 30 46 2 2 0,62 0,62 R2,6 R2,6 6 6 Cut Cutting data are minimum 10 m/min. depending on the material. Squareness and burr-free cutting edges also for materials >30 mm. No outbreaks and burrs The ultrasonic knives are ideal for cutting soft, porous and unstable materials with fragile connections. Through the use of ultrasonic there is no risk of deformation of the products, therefore even sensitive materials can be cut without hesitation can be achieved. Thanks to the minimized surface friction even the smallest areas can be cleaned and accurately processed. The blades are designed in such a way that they do not bond with the material, therefore no breakouts and burrs emerge. They convince not only with high productivity and minimum cleaning time, but also with a high machining speed, energy-saving efficiency and a low environmental impact. We have developed blades especially for wind turbine blade cores. Here, we have particularly focused on exact angularity in the cut and material are respected. This is complemented by a degree we Tear-free cutting edge. In trials we have measured cutting speeds of minimum 10m/min. These can be customer-specific and vary depending on the machine. 3,18° 3,18° BT-572070 32,60 32,60 BT-57230 BT-57230 2 60° 2 60° 70 83 70 83 R1,5 1,8 1 6 R1,5 1,8 1 6 Example of a high performance ultrasonic knife. Highly precise and made of carbide with ultrafine-corn grain. BT-572070 Ultrafine-corn Grain Carbide BT-572070 (FW**) (VW**) Ultrafine-corn grain carbide enables the use of density, in high degree of hardness and best breaking strength a wide industrial application. It is used for many industrial knives and can be well eroded. Ultrafine-corn Grain. Conventional Grain. Kyocera Unimerco Tooling GmbH | Hammfelddamm 6 | D-41460 Neuss | Tel. +49 (0)2131 88 19 115 | Fax +49 (0)2131 16 37 152
Download PDF file
Archive