SAW MASTER™ SAWING FLUID Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830 Issue date: 15-6-2017 Revision date: 24-3-2020Supersedes: 1-11-2018 Version: 2.1 6.1.1. For non-emergency personnel Protective equipment : Wear recommended personal protective equipment. 6.1.2. For emergency responders Protective equipment : Equip cleanup crew with proper protection. 6.2. Environmental precautions Prevent entry to sewers and public waters. Avoid release to the environment. Notify authorities if liquid enters sewers or public waters. 6.3. Methods and material for containment and cleaning up Methods for cleaning up : Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Sweep or shovel spills into appropriate container for disposal. This material and its container must be disposed of in a safe way, and as per local legislation. 6.4. Reference to other sections See Section 1 for emergency contact information. See Section 8 for information on appropriate personal protective equipement. Concerning disposal elimination after cleaning, see section 13. SECTION 7: Handling and storage 7.1. Precautions for safe handling Additional hazards when processed Precautions for safe handling Hygiene measures : Handle in accordance with good industrial hygiene and safety practice. : Provide good ventilation in process area to prevent formation of vapour. : Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Wash contaminated clothing before reuse. 7.2. Conditions for safe storage, including any incompatibilities Technical measures Storage conditions Incompatible products Storage area : Comply with applicable regulations. : Keep container closed when not in use. Keep at temperatures between 5°C and 35°C in original container. : Strong bases. Strong acids. : Store in a well-ventilated place. 7.3. Specific end use(s) Use only as recommended on the product application sheet. More information can be found on: www.lenoxtools.eu. SECTION 8: Exposure controls/personal protection 8.1. Control parameters No additional information available 8.2. Exposure controls Appropriate engineering controls: Ensure good ventilation of the work station. Mist levels should comply with local regulations. Personal protective equipment: Avoid all unnecessary exposure. Hand protection: Impervious gloves are recommended when handling product concentrate. The same gloves can be used for the diluted product, if considered necessary. Consider the particular working conditions under which the gloves are being used. Type Material Permeation Thickness (mm) Penetration Standard Disposable gloves, Nitrile rubber (NBR) 6 (> 480 minutes) 0.11 Reusable gloves EN ISO 374 Eye protection: 24-3-2020 EN (English) 3/9
Download PDF file
Archive