INTRODUCTION The pneumatic tools is a precision-built tool, designed for high speed, high volume fastening. These tools will deliver efficient, dependable service when used correctly, and with care. As with any fine power tool for best performance the manufacture’s instructions must be followed. Please study this manual before operating the tool and understand the safety warning and cautions. The instructions on installation, operation and maintenance should be read, carefully, and the manual kept for reference. NOTE: Additional safety measures may be required because of your particular application of the tool. Contact your representative or distributor with any questions concerning the tool and its use. INDEX INTRODUCTION………………………….……………………………………………….….1 SAFETY INSTRUCTIONS………………………………………………………………….…2 AIR SYSTEMS……………………………………………………………………………….…5 TOOL INSTALLATION…………………………………………………………………….…7 TOOL LOADING….……………………………………………………………………………8 TOOL OPERATION…………………………………………………………………………….9 MAINTENANCE…………………………………………………………………………….….10 OPERATOR TROUBLESHOOTING…………………………………………………………14 TOOL SPECIFICATIONS MODEL LENGTH 322 mm (12 11/16“) WIDTH 403mm (15 7/8“) HEIGHT 81mm (3 3/16“) WEIGHT 3.2kg (7,1lbs) CAPACITY 13 T-NUTS TJEP LB-18 FASTENER SPECIFICATIONS: MODEL T-NUT SIZE 23×21mm TJEP LB-18 (7/8”×13/16”) M6, M8, M10 (1/4”, 5/16”, 3/8”) DIAMETER BARREL LENGTH 11,5-18mm (7/16”-3/4”) TOOL AIR FITTING This tool uses a 1/4” N.P.T male plug. The inside diameter should be .200”(5mm) or larger. The fitting must be capable of discharging tool air pressure when disconnected from the air supply. OPERATING PRESSURE DO NOT EXCEED THIS RECOMMENDED OPERATING PRESSURE. NOISE CHARACTERISTIC VALUES IN ACCORDANCE WIT Enxxl: A-weighted single-event sound pressure level at operator’s :LPA,2s= 89 dBA A-weighted single-event sound power lever :LWA,1s= 98 dBA A-weighted single-event surface sound pressure level :LPA,1s,1m= 85 dBA VIBRATION CHARACTERISTIC VALUES IN ACCORDANCE WITH ISO 8662; PART11: Weighted root mean square acceleration: 3,01 m/s2 70 to 110 p.s.i. (4,9 to 7,8kg/ fastener performance. 2 ) Select the operating pressure within this range for best -2-
Download PDF file
Archive